Central heating repair in St Albans / Central heating repair in Hemel Hempstead / Central heating repair in Hatfield / Central heating repair in Harpenden / Central heating repair in Redbourn / Central heating repair in Wheathampstead

Central Heating Repairs

We offer central heating repair services in St Albans, Hemel Hempstead, Harpenden, Hatfield and surrounding west Hertfordshire areas.

Apart from a boiler, it may have a pump and one or two motorised valves in a heating system, plus a programmer and a room thermostat. All of these form a whole auto-controlled central heating system. If there is a faulty part, like pump or valve, the heating or the hot water will not function properly.

We are also electricians, so repairing heating controls is one of our favorites.  

There are three types of heating and hot water systems in domestic promises.

1. Vented, also called open-vented, or open system. Being widely installed until ten years ago, still popularly used in domestic homes. A breakdown can happen to its boiler and the controls which are outside the boiler. The boiler used in this system are very much simple called heat only boilers. Other parts which are prone to develop problems are circulation pumps and  motorised valves (two-ports or three-ports).

 Open vented

2. Combi system. It is a much more simple system with just a combi boiler. Almost breakdowns are inside boilers. A combi boilers includes an internal pump and a diverter valve. Outside the boiler there is not too much to be worried about.

Combi Sealed

3. Megaflow system, also called un-vented or sealed system. It is a modern main-pressured hot water system with higher flow rate. For repairs it is the same as vented, any breakdown can happen to boiler and outside controls.


There are two types of electrical control systems to vented and megaflow systems.

4. Thermal stores. Similar with unvented cylinders, these thermal stores can deliver mains pressure hot water with a higher flow rate. There are in both vented and unvented types, and the former is more porpular.

Thermal Stores

There are two types of electrical control systems to vented and megaflow systems.

1. Y-plan, a well used in most domestic promises.


2. S-plan, seen in most of new megaflow systems.


A heating control system consists of a programmer and a room thermal stat for client control. There are also motorised valves, either a three port or two of two port valves, and a cylinder stat, plus a circulation pump. Central heating repairs are for these components.

Heating & DHW controlsLogic S Plan

Hot water cylinders principles:

Apart from a combi boiler, all domestic hot water systems, either vented or unvented, will have a hot water cylinder to store pre-heated hot water ready for use. Here is an unvented hot water cylinder, but vented will have the same principles, just "Cold water in" is from water mains instead of a loft cistern.

Hot water cylinder

 Mobile: 07944 168888 / Email: info@ege.co.uk
Telephone: 01727 537688 / Fax: 01727 537689
Address: 77 Batchwood Drive, St Albans, Herts, AL3 5UF

Central heating repairs St Albans / Central heating repairs Hemel Hempstead / Central heating repairs Hatfield / Central heating repairs Harpenden / Central heating repairs Redbourn / Central heating repairs Wheathampstead / Central heating repairs Radlett

Copyright© 2009-2018 Herts Boilers. All rights reserved.